ABB Error 111530 — BullsEye Error

What it means · Ce que ça veut dire

BullsEye Error — ABB robot hardware event on the BullsEye Error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Beam location could not be determined. Tool: arg Task: arg BullsEye will not be able to evaluate this tool. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the BullsEye Error, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check that the sensor device is working properly.
• Execute the BESetupToolJ setup instruction to define the beam position.

Frequently asked · Questions fréquentes

What does ABB error 111530 mean?

ABB 111530 (“BullsEye Error”): BullsEye Error — ABB robot hardware event on the BullsEye Error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 111530?

Inspect the BullsEye Error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés