ABB Error 111924 — Operation handler not in use

What it means · Ce que ça veut dire

Operation handler not in use — ABB robot hardware event on the Operation handler not in use (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg Function arg failed. The current targets in this operation are lost. Program Ref. arg It is not possible to finish this operation. The execution will stop if no action is taken in an ERROR handler. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Operation handler not in use, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : This might be caused by a pulse on the Robot Execution signal after the operation descriptor has been fetched.
• It is more likely to occur if the operation is a multidrop.
• Move PP to main and restart the execution.
• Use an ERROR handler and run i.e.
• ExitCycle.

Frequently asked · Questions fréquentes

What does ABB error 111924 mean?

ABB 111924 (“Operation handler not in use”): Operation handler not in use — ABB robot hardware event on the Operation handler not in use (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 111924?

Inspect the Operation handler not in use, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés