ABB Error 111925 — Failed to open PM work area signal

What it means · Ce que ça veut dire

Failed to open PM work area signal — ABB robot hardware event on the Failed to open PM work area signal (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

An error occurred when opening signal arg configured in PickMaster for work area: arg. (Internal status arg.) The current PickMaster project will not execute. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Failed to open PM work area signal, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The work area signal is missing in the I/O configuration of the robot controller.
• The I/O unit is not running.
• Check the signal name in the Work Area configuration of PickMaster.
• Check the signal name in the I/O configuration of the robot controller.
• Check if the I/O unit is running.

Frequently asked · Questions fréquentes

What does ABB error 111925 mean?

ABB 111925 (“Failed to open PM work area signal”): Failed to open PM work area signal — ABB robot hardware event on the Failed to open PM work area signal (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 111925?

Inspect the Failed to open PM work area signal, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés