ABB Error 111927 — PM group signal too short for work area

What it means · Ce que ça veut dire

PM group signal too short for work area — ABB robot hardware event on the PM group signal too short for work area (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

PickMaster group signal arg configured for work area arg has too few bits. Required number of bits is arg . The current project can not execute. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the PM group signal too short for work area, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The signal has to few bits defined in the I/O configuration of the controller.
• Check the controller I/O configuration of the signal.

Frequently asked · Questions fréquentes

What does ABB error 111927 mean?

ABB 111927 (“PM group signal too short for work area”): PM group signal too short for work area — ABB robot hardware event on the PM group signal too short for work area (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 111927?

Inspect the PM group signal too short for work area, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés