ABB Error 112100 — PickMaster project file is too old

What it means · Ce que ça veut dire

PickMaster project file is too old — ABB robot hardware event on the PickMaster project file is too old (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The arg file is not supported by this RobotWare. The required project file is too old and the project is therefore stopped. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the PickMaster project file is too old, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The PickMaster version used to configure this project is too old for this RobotWare.
• Required version by RobotWare: arg PickMaster version used to create file: arg Update the project using at least version arg of PickMaster.

Frequently asked · Questions fréquentes

What does ABB error 112100 mean?

ABB 112100 (“PickMaster project file is too old”): PickMaster project file is too old — ABB robot hardware event on the PickMaster project file is too old (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112100?

Inspect the PickMaster project file is too old, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés