ABB Error 112150 — Failed to request new target set

What it means · Ce que ça veut dire

Failed to request new target set — ABB robot hardware event on the Failed to request new target set (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The target pump process "arg" failed to request new target set from project. Last trigged operation set can not be pushed into the Work Area queue. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Failed to request new target set, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The trigged operation set (arg) is not configured in the project.
• The trigged combination of product I/O value (arg) and format I/O value (arg) is not configured in the project.
• Status: arg Review the project setup.
• Check the product and format selection groups signal values.

Frequently asked · Questions fréquentes

What does ABB error 112150 mean?

ABB 112150 (“Failed to request new target set”): Failed to request new target set — ABB robot hardware event on the Failed to request new target set (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112150?

Inspect the Failed to request new target set, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés