ABB Error 112152 — Response error for work area

What it means · Ce que ça veut dire

Response error for work area — ABB robot hardware event on the Response error for work area (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Response error occured for slave work area arg . Targets generated (product = arg, format = arg) does not match positions requested (product = arg, format = arg). The work area has entered a reponse error state. The robot will not access the work area until the correct targets are generated. Any flow using the work area may become blocked from execution. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Response error for work area, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The product selection I/O values for position request and target generation is not the same.
• The format selection I/O values for position request and target generation is not the same.
• Verify sequence logic and I/O values of external equipment setting the product and/or format I/O signals (i.e.
• To recover from the response error: 1) Verify that the requested targets are available on the work area.
• 2) Trigger a new target generation with correct I/O selection values.

Frequently asked · Questions fréquentes

What does ABB error 112152 mean?

ABB 112152 (“Response error for work area”): Response error for work area — ABB robot hardware event on the Response error for work area (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112152?

Inspect the Response error for work area, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés