ABB Error 112203 — Wrong PickMaster Error Source Value

What it means · Ce que ça veut dire

Wrong PickMaster Error Source Value — ABB robot hardware event on the Wrong PickMaster Error Source Value (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The value that was read, arg, after an event was trigged does not match one or several configured bits in the IO signal arg . The system goes to SYS STOP state. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Wrong PickMaster Error Source Value, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Verify the configuration using the PickMaster PC application.
• Verify external equipment generating the signal value.

Frequently asked · Questions fréquentes

What does ABB error 112203 mean?

ABB 112203 (“Wrong PickMaster Error Source Value”): Wrong PickMaster Error Source Value — ABB robot hardware event on the Wrong PickMaster Error Source Value (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112203?

Inspect the Wrong PickMaster Error Source Value, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés