ABB Error 112350 — Target configuration outside reach

What it means · Ce que ça veut dire

Target configuration outside reach — ABB robot hardware event on the Target configuration outside reach (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg A valid robot configuration within reach was not found for target. Program Ref: arg The robot is not able to move to the target position. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Target configuration outside reach, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The target position is outside reach.
• A robot configuration was not found within reach for the target.
• Move the target position within the reach of the robot.
• Check if the target position is possible to reach without robot configuration control (ConfJ\Off, ConfL\Off).
• Use an error handler and do a RETRY on instruction.

Frequently asked · Questions fréquentes

What does ABB error 112350 mean?

ABB 112350 (“Target configuration outside reach”): Target configuration outside reach — ABB robot hardware event on the Target configuration outside reach (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112350?

Inspect the Target configuration outside reach, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés