ABB Error 112360 — Stack search adjusted stack layers

What it means · Ce que ça veut dire

Stack search adjusted stack layers — ABB robot hardware event on the Stack search adjusted stack layers (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Stack search adjusted the number of available layers in stack. Task: arg Instruction: arg . Program Ref. arg Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Stack search adjusted stack layers, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : Actual stack height was lower than configured in PickMaster.
• No actions are required.
• The default error handlers of the Operate() and OperateSequenc() routines will recover the error.
• Recovery: arg

Frequently asked · Questions fréquentes

What does ABB error 112360 mean?

ABB 112360 (“Stack search adjusted stack layers”): Stack search adjusted stack layers — ABB robot hardware event on the Stack search adjusted stack layers (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112360?

Inspect the Stack search adjusted stack layers, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés