ABB Error 112365 — Not Valid Signal

What it means · Ce que ça veut dire

Not Valid Signal — ABB robot hardware event on the Not Valid Signal (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg The signal arg is not correct used for current instruction. Program Ref: arg The RAPID execution will stop immediately and it is not possible to recover from this error until the faulty signal is corrected. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Not Valid Signal, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : 1.
• The signal is unknown in the system.
• If the signal is defined in the RAPID program, it must be connected to the configured signal with instruction AliasIO.
• Signal argument is outside allowed limits.
• There is no contact with the IO unit.

Frequently asked · Questions fréquentes

What does ABB error 112365 mean?

ABB 112365 (“Not Valid Signal”): Not Valid Signal — ABB robot hardware event on the Not Valid Signal (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112365?

Inspect the Not Valid Signal, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés