ABB Error 112367 — The Requested Project Could Not Be Found

What it means · Ce que ça veut dire

The Requested Project Could Not Be Found — ABB robot hardware event on the The Requested Project Could Not Be Found (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg The requested project arg could not be found in the PickMaster project folder. The project can be identified both with its name and its selection value. Program Ref: arg It is not possible to get any information about the project. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the The Requested Project Could Not Be Found, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : 1.
• The requested project is not transferred from PickMaster PC.
• The mapping between project and signal is wrong or missing.
• Recovery: arg

Frequently asked · Questions fréquentes

What does ABB error 112367 mean?

ABB 112367 (“The Requested Project Could Not Be Found”): The Requested Project Could Not Be Found — ABB robot hardware event on the The Requested Project Could Not Be Found (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112367?

Inspect the The Requested Project Could Not Be Found, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés