ABB Error 112376 — Required WorkArea is not valid

What it means · Ce que ça veut dire

Required WorkArea is not valid — ABB robot hardware event on the Required WorkArea is not valid (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg PmSetRecoverAction with selected recover action requires a valid WokArea descriptor. Program Ref: arg Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Required WorkArea is not valid, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : 1.
• Recover action PM\_RECOVER\_REDO\_LAYER and PM\_RECOVER\_NEXT\_PALLET requires the optional argument WorkArea to be set.
• The WorkArea descriptor is not initialized.
• The WorkArea is not a part of the flow arg .
• Recover: arg

Frequently asked · Questions fréquentes

What does ABB error 112376 mean?

ABB 112376 (“Required WorkArea is not valid”): Required WorkArea is not valid — ABB robot hardware event on the Required WorkArea is not valid (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112376?

Inspect the Required WorkArea is not valid, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés