ABB Error 112377 — Faulty Recover Action

What it means · Ce que ça veut dire

Faulty Recover Action — ABB robot hardware event on the Faulty Recover Action (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg arg is not one of the supported recover actions. Program Ref: arg It will not be possible to start the Flow arg if it is set in error state. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Faulty Recover Action, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The recover action is not one of PM\_RECOVER\_CONTINUE\_OPERATION, PM\_RECOVER\_REDO\_LAYER, PM\_RECOVER\_NEXT\_PALLET or PM\_RECOVER\_REDO\_LAST\_PICK.
• Recover: arg

Frequently asked · Questions fréquentes

What does ABB error 112377 mean?

ABB 112377 (“Faulty Recover Action”): Faulty Recover Action — ABB robot hardware event on the Faulty Recover Action (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112377?

Inspect the Faulty Recover Action, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés