ABB Error 112413 — 5V power supply low

What it means · Ce que ça veut dire

5V power supply low — ABB robot hardware event on the 5V power supply low (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The power supply voltage is too low in unit arg . Fault code: arg Internal unit: arg The current welding process is stopped and starting is prevented. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the 5V power supply low, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Turn off the mains power supply to reset the unit.
• If the fault persists, send for a service technician.

Frequently asked · Questions fréquentes

What does ABB error 112413 mean?

ABB 112413 (“5V power supply low”): 5V power supply low — ABB robot hardware event on the 5V power supply low (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112413?

Inspect the 5V power supply low, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés