ABB Error 112415 — High temperature

What it means · Ce que ça veut dire

High temperature — ABB robot hardware event on the High temperature (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The thermal overload-cut has tripped in unit arg . Fault code: arg Internal unit: arg The current welding process is stopped and cannot be restarted until the cut-out has reset. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the High temperature, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check that the cooling air inlets or outlets are not blocked or clogged with dirt.
• Check the duty cycle being used, to make sure that the equipment is not being overloaded.

Frequently asked · Questions fréquentes

What does ABB error 112415 mean?

ABB 112415 (“High temperature”): High temperature — ABB robot hardware event on the High temperature (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112415?

Inspect the High temperature, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés