ABB Error 112429 — Non-permitted set values stored in RAM

What it means · Ce que ça veut dire

Non-permitted set values stored in RAM — ABB robot hardware event on the Non-permitted set values stored in RAM (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Non-permitted values have been discovered at start-up in unit arg . Fault code: arg Internal unit: arg Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Non-permitted set values stored in RAM, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Delete all data contained in the welding data unit.
• Turn off the mains power supply to reset the unit.
• The welding unit is reset.

Frequently asked · Questions fréquentes

What does ABB error 112429 mean?

ABB 112429 (“Non-permitted set values stored in RAM”): Non-permitted set values stored in RAM — ABB robot hardware event on the Non-permitted set values stored in RAM (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112429?

Inspect the Non-permitted set values stored in RAM, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés