ABB Error 112525 — WDM Weld Start Error

What it means · Ce que ça veut dire

WDM Weld Start Error — ABB robot hardware event on the WDM Weld Start Error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

An unspecified error occurred at the start of the seam. Task: arg Weld Data Monitor may be inoperable. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the WDM Weld Start Error, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Please contact your ABB representative.

Frequently asked · Questions fréquentes

What does ABB error 112525 mean?

ABB 112525 (“WDM Weld Start Error”): WDM Weld Start Error — ABB robot hardware event on the WDM Weld Start Error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112525?

Inspect the WDM Weld Start Error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés