ABB Error 112702 — Camera job is not valid

What it means · Ce que ça veut dire

Camera job is not valid — ABB robot hardware event on the Camera job is not valid (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The camera arg is in running mode, but the loaded job is not a valid ABB job. All camera results will be lost. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Camera job is not valid, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : An attempt may have been made to load a job that does not conform with the ABB definition of a job.
• Set the camera in program mode.
• Load a valid ABB job into the camera or use Robot Studio to create a new job.
• This page is intentionally left blank

Frequently asked · Questions fréquentes

What does ABB error 112702 mean?

ABB 112702 (“Camera job is not valid”): Camera job is not valid — ABB robot hardware event on the Camera job is not valid (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 112702?

Inspect the Camera job is not valid, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés