ABB Error 12513 — No parameters from the DHCP server

What it means · Ce que ça veut dire

No parameters from the DHCP server — ABB robot hardware event on the No parameters from the DHCP server (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The network interface arg has not received any parameters from the DHCP server. The interface will not be configured, and may not be used. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the No parameters from the DHCP server, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The LAN connection is not working -The DHCP server is not activated.
• - 1) Make sure the LAN cable is working and correctly connected.
• - 2) Make sure the DHCP server is activated.
• - 3) Set the LAN IP address manually.

Frequently asked · Questions fréquentes

What does ABB error 12513 mean?

ABB 12513 (“No parameters from the DHCP server”): No parameters from the DHCP server — ABB robot hardware event on the No parameters from the DHCP server (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 12513?

Inspect the No parameters from the DHCP server, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés