ABB Error 133208 — arg:Val lo

What it means · Ce que ça veut dire

arg:Val lo — ABB robot hardware event on the arg:Val lo (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Value for named sensor or device has exceeded minimum limit. IPS has discovered an alarm state for named sensor or device. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the arg:Val lo, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check if value for named sensor or device is too low.
• Check for IPS configured LIMIT- alarms and verify that limits are OK.

Frequently asked · Questions fréquentes

What does ABB error 133208 mean?

ABB 133208 (“arg:Val lo”): arg:Val lo — ABB robot hardware event on the arg:Val lo (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 133208?

Inspect the arg:Val lo, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés