ABB Error 133212 — arg:Comp. lo

What it means · Ce que ça veut dire

arg:Comp. lo — ABB robot hardware event on the arg:Comp. lo (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Regulator for named device has compensated too much compared to the calibrated curve and its compensations Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the arg:Comp. lo, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check in IPS config if compensation limits for named device are too tight.
• Check supply pressures, hoses, sensor and transducer used by named device.

Frequently asked · Questions fréquentes

What does ABB error 133212 mean?

ABB 133212 (“arg:Comp. lo”): arg:Comp. lo — ABB robot hardware event on the arg:Comp. lo (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 133212?

Inspect the arg:Comp. lo, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés