ABB Error 133214 — arg:Setp. hi

What it means · Ce que ça veut dire

arg:Setp. hi — ABB robot hardware event on the arg:Setp. hi (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Setpoint value for named device is too high. The setpoint value is set to the maximum configured value for named device. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the arg:Setp. hi, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check if setpoint to named device is set too high.
• Change the maximum value in the IPS config file if needed.

Frequently asked · Questions fréquentes

What does ABB error 133214 mean?

ABB 133214 (“arg:Setp. hi”): arg:Setp. hi — ABB robot hardware event on the arg:Setp. hi (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 133214?

Inspect the arg:Setp. hi, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés