ABB Error 133215 — arg:Setp. lo

What it means · Ce que ça veut dire

arg:Setp. lo — ABB robot hardware event on the arg:Setp. lo (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Setpoint value for named device is too low. The setpoint value is set to the minimum configured value for named device. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the arg:Setp. lo, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check if setpoint to named device is set too low.
• Change the minimum value in the IPS config file if needed.
• 4.12 13 xxxx

Frequently asked · Questions fréquentes

What does ABB error 133215 mean?

ABB 133215 (“arg:Setp. lo”): arg:Setp. lo — ABB robot hardware event on the arg:Setp. lo (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 133215?

Inspect the arg:Setp. lo, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés