ABB Error 133216 — arg:Seq. error

What it means · Ce que ça veut dire

arg:Seq. error — ABB robot hardware event on the arg:Seq. error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

IPS has discovered a trig sequence error. The Dynamic Delay Compensation function for named device measured an 'on'- transition while expecting an 'off'- transition. (Or opposite) Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the arg:Seq. error, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check if the sensor signal has the correct level.
• Check if the sensor signal is noisy.

Frequently asked · Questions fréquentes

What does ABB error 133216 mean?

ABB 133216 (“arg:Seq. error”): arg:Seq. error — ABB robot hardware event on the arg:Seq. error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 133216?

Inspect the arg:Seq. error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés