LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

ABB Error 133227 — Watch dog failure between FPGA and IPS

Error / Erreur

🇫🇷 Watch dog failure between FPGA and IPS

ABB — CATALOGUE PRODUCTION

ABB 133227 (“Watch dog failure between FPGA and IPS”): Watch dog failure between FPGA and IPS — ABB robot hardware event on the Watch dog failure between FPGA and IPS (IRC5).

Updated 2026-08-29 · LogrobotLM reference

What it means · Ce que ça veut dire

Watch dog failure between FPGA and IPS — ABB robot hardware event on the Watch dog failure between FPGA and IPS (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The watch dog function between arg and FPGA monitoring running on the manipulator control board (MCB) has detected a failure. The system stops and disables painting functions and will need to be restarted to recover. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

  • Inspect the Watch dog failure between FPGA and IPS, its wiring and connections first.
  • Match this code against your robot's event-log timeline before swapping parts.
  • Follow the French field checks below — they are the tested sequence for this fault.
  • probable : This situation is unexpected and indicates an internal error and could be caused by a software deficiency on IPS or FPGA.
  • - Check for other symptoms and system messages.
  • - If this occurs on a new installation during startup, please verify all parameters and configuration.
  • - If this occurs on a system during operation, please check for other symptoms.
  • The problem is most likely not related to any hardware.

Frequently asked · Questions fréquentes

What does ABB error 133227 mean?
ABB 133227 (“Watch dog failure between FPGA and IPS”): Watch dog failure between FPGA and IPS — ABB robot hardware event on the Watch dog failure between FPGA and IPS (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.
How do you troubleshoot ABB error 133227?
Inspect the Watch dog failure between FPGA and IPS, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés

10005Program stopped10007Programme lancé10008Programme relancé

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →