ABB Error 133270 — Failed to update IPS parameters

What it means · Ce que ça veut dire

Failed to update IPS parameters — ABB robot hardware event on the Failed to update IPS parameters (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

IPS failed to update IPS parameter values after reconnect of IPS agent connections. The update was initiated after the IPS agents have been lost for any reason, typically caused by a purge fault. The system must be restarted to ensure all parameters are set with correct values. IPS parameters may not have been updated with correct values. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Failed to update IPS parameters, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : IPS device or parameter may not exist or command is given with an invalid value.
• Check if all IPS nodes are up and running.
• Check IPS parameter files.
• Restart system.

Frequently asked · Questions fréquentes

What does ABB error 133270 mean?

ABB 133270 (“Failed to update IPS parameters”): Failed to update IPS parameters — ABB robot hardware event on the Failed to update IPS parameters (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 133270?

Inspect the Failed to update IPS parameters, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés