ABB Error 133310 — Servo Drive overload

What it means · Ce que ça veut dire

Servo Drive overload — ABB robot hardware event on the Servo Drive overload (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

SDI board has discovered high temperature in transistors on the Drive unit used by: arg . This problem is caused by overload for the actual Drive. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Servo Drive overload, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Too much torque for the Drive unit.
• Check system for overload in torque.
• Check if robot or pump is jammed.
• Replace Drive unit.

Frequently asked · Questions fréquentes

What does ABB error 133310 mean?

ABB 133310 (“Servo Drive overload”): Servo Drive overload — ABB robot hardware event on the Servo Drive overload (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 133310?

Inspect the Servo Drive overload, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés