ABB Error 133330 — Servo current meas. error

What it means · Ce que ça veut dire

Servo current meas. error — ABB robot hardware event on the Servo current meas. error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

SDI board has discovered a servo current measurement error, caused by an error in the current measurement bridge. This is an internal error, received from the Drive unit used by: arg Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Servo current meas. error, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check/replace Drive unit.
• Check/replace SDI board.
• Contact customer support.

Frequently asked · Questions fréquentes

What does ABB error 133330 mean?

ABB 133330 (“Servo current meas. error”): Servo current meas. error — ABB robot hardware event on the Servo current meas. error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 133330?

Inspect the Servo current meas. error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés