ABB Error 133333 — Servo sync no load par.

What it means · Ce que ça veut dire

Servo sync no load par. — ABB robot hardware event on the Servo sync no load par. (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

SDI board has discovered a sync with no parameters, received from the Drive unit used by: arg . Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Servo sync no load par., its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check SDI configuration.
• Check/replace Drive unit.
• Check/replace SDI board.
• Contact customer support.

Frequently asked · Questions fréquentes

What does ABB error 133333 mean?

ABB 133333 (“Servo sync no load par.”): Servo sync no load par. — ABB robot hardware event on the Servo sync no load par. (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 133333?

Inspect the Servo sync no load par., its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés