ABB Error 133436 — Open circuit in bleeder resistor circuit

What it means · Ce que ça veut dire

Open circuit in bleeder resistor circuit — ABB robot hardware event on the Open circuit in bleeder resistor resistor circuit (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The bleeder resistor connected to the rectifier is an open circuit, detected by: arg . Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Open circuit in bleeder resistor resistor circuit, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Make sure the bleeder resistor cable is correctly connected to the rectifier unit.
• Make sure the cable and resistor is working correctly by measuring their resistance respectively.
• Disconnect before measuring.
• Replace any faulty component.

Frequently asked · Questions fréquentes

What does ABB error 133436 mean?

ABB 133436 (“Open circuit in bleeder resistor circuit”): Open circuit in bleeder resistor circuit — ABB robot hardware event on the Open circuit in bleeder resistor resistor circuit (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains…

How do you troubleshoot ABB error 133436?

Inspect the Open circuit in bleeder resistor resistor circuit, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés