ABB Error 20094 — Load name could not be found

What it means · Ce que ça veut dire

Load name could not be found — ABB robot hardware event on the Load name could not be found (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Load name arg could not be found. It is not possible to jog without a correct defined load. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Load name could not be found, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The module with the load definition is probably deleted.
• Load module with load definition.
• Choose other load.

Frequently asked · Questions fréquentes

What does ABB error 20094 mean?

ABB 20094 (“Load name could not be found”): Load name could not be found — ABB robot hardware event on the Load name could not be found (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 20094?

Inspect the Load name could not be found, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés