ABB Error 20106 — Backup path

What it means · Ce que ça veut dire

Backup path — ABB robot hardware event on the Backup path (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

There are errors in the backup path or the backup name in the configuration for the System Input Backup. The directory for the backup cannot be created. Backup path: arg. Backup name: arg . The command "Backup" from System Input Signal will be rejected. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Backup path, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Verify that configured path and name for the System Input Backup are correct.

Frequently asked · Questions fréquentes

What does ABB error 20106 mean?

ABB 20106 (“Backup path”): Backup path — ABB robot hardware event on the Backup path (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 20106?

Inspect the Backup path, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés