ABB Error 20194 — Auto-recovery backup could not be created

What it means · Ce que ça veut dire

Auto-recovery backup could not be created — ABB robot hardware event on the Auto-recovery backup could not be created (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The system state was restored successfully on startup but a auto-recovery backup of the current system state could not be created. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Auto-recovery backup could not be created, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Report this problem to ABB support.

Frequently asked · Questions fréquentes

What does ABB error 20194 mean?

ABB 20194 (“Auto-recovery backup could not be created”): Auto-recovery backup could not be created — ABB robot hardware event on the Auto-recovery backup could not be created (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 20194?

Inspect the Auto-recovery backup could not be created, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés