ABB Error 20205 — Auto Stop open

What it means · Ce que ça veut dire

Auto Stop open — ABB robot hardware event on the Auto Stop open (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The Automatic Mode Safeguarded Stop circuit has been broken. The system goes to the Auto Stop status. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Auto Stop open, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : One or more of the switch connected in series with the Automatic Mode Safeguarded Stop circuit have been opened, which may be causes by a large number of faults.
• This is only possible while in the Auto operational mode.
• The Automatic Mode Safeguarded Stop circuit is described in the Trouble Shooting Manual.
• - 1) Locate the switch, reset it and restart the system.
• - 2) Check cables and connections.

Frequently asked · Questions fréquentes

What does ABB error 20205 mean?

ABB 20205 (“Auto Stop open”): Auto Stop open — ABB robot hardware event on the Auto Stop open (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 20205?

Inspect the Auto Stop open, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés