ABB Error 20225 — Auto Stop conflict

What it means · Ce que ça veut dire

Auto Stop conflict — ABB robot hardware event on the Auto Stop conflict (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Only one of the two Automatic Mode Safeguarded Stop chains was opened. The system goes to status SYS HALT. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Auto Stop conflict, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : Any of the switches connected to the Auto Stop chain may be faulty or not correctly connected, causing only one channel to close.
• The Auto Stop chain is described in the Trouble Shooting Manual, IRC5.
• - 1) Check cables and connections.
• - 2) Check other event log messages occurring at the same time to determine which switch caused the fault.
• - 3) Make sure all switches are working correctly.

Frequently asked · Questions fréquentes

What does ABB error 20225 mean?

ABB 20225 (“Auto Stop conflict”): Auto Stop conflict — ABB robot hardware event on the Auto Stop conflict (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 20225?

Inspect the Auto Stop conflict, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés