ABB Error 20414 — Program start failed

What it means · Ce que ça veut dire

Program start failed — ABB robot hardware event on the Program start failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Start of program execution failed when the controller was resuming from an energy saving state. The system will resume from energy saving state, but remain in stopped state. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Program start failed, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.

Frequently asked · Questions fréquentes

What does ABB error 20414 mean?

ABB 20414 (“Program start failed”): Program start failed — ABB robot hardware event on the Program start failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 20414?

Inspect the Program start failed, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés