ABB Error 20443 — Multiple firmware upgrade restarts

What it means · Ce que ça veut dire

Multiple firmware upgrade restarts — ABB robot hardware event on the Multiple firmware upgrade restarts (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

A new restart to firmware upgrade mode was ordered after two consecutive upgrade restarts. No further restart to firmware upgrade mode was performed. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Multiple firmware upgrade restarts, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : Firmware upgrade of a hardware board has most likely failed.
• The board's firmware or hardware may be corrupt.
• Check the event log for previous error messages.

Frequently asked · Questions fréquentes

What does ABB error 20443 mean?

ABB 20443 (“Multiple firmware upgrade restarts”): Multiple firmware upgrade restarts — ABB robot hardware event on the Multiple firmware upgrade restarts (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 20443?

Inspect the Multiple firmware upgrade restarts, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés