ABB Error 20583 — Watchdog towards PIB software fails

What it means · Ce que ça veut dire

Watchdog towards PIB software fails — ABB robot hardware event on the Watchdog towards PIB software fails (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Status active when firmware on Process Interface Board (PIB) discovers watchdog fault between PIB firmware and PIB software. The system is in system halt state. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Watchdog towards PIB software fails, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : Too high processor load on PIB software.

Frequently asked · Questions fréquentes

What does ABB error 20583 mean?

ABB 20583 (“Watchdog towards PIB software fails”): Watchdog towards PIB software fails — ABB robot hardware event on the Watchdog towards PIB software fails (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 20583?

Inspect the Watchdog towards PIB software fails, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés