ABB Error 20632 — IP address of the camera has changed

What it means · Ce que ça veut dire

IP address of the camera has changed — ABB robot hardware event on the IP address of the camera has changed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The IP address of the camera arg has changed. It is necessary to restart the controller to use the Integrated Vision functionality. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the IP address of the camera has changed, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Restart the controller.

Frequently asked · Questions fréquentes

What does ABB error 20632 mean?

ABB 20632 (“IP address of the camera has changed”): IP address of the camera has changed — ABB robot hardware event on the IP address of the camera has changed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 20632?

Inspect the IP address of the camera has changed, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés