ABB Error 32501 — Main computer fpga not reachable

What it means · Ce que ça veut dire

Main computer fpga not reachable — ABB robot hardware event on the Main computer fpga not reachable (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The system cannot contact the fpga on the main computer. No communication with the safety system is possible. The system goes to system failure state. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Main computer fpga not reachable, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The main computer fpga is malfunctioning.
• - 1 Replace the unit if faulty.

Frequently asked · Questions fréquentes

What does ABB error 32501 mean?

ABB 32501 (“Main computer fpga not reachable”): Main computer fpga not reachable — ABB robot hardware event on the Main computer fpga not reachable (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 32501?

Inspect the Main computer fpga not reachable, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés