ABB Error 32560 — Axis computer firmware re-flash started

What it means · Ce que ça veut dire

Axis computer firmware re-flash started — ABB robot hardware event on the Axis computer firmware re-flash started (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

In drive module arg , a required upgrade of the firmware in the axis computer arg with hardware identity arg has started. The old firmware revision arg is replaced with revision arg . Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Axis computer firmware re-flash started, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Wait for the firmware upgrade process to complete.
• Do not turn off system power!

Frequently asked · Questions fréquentes

What does ABB error 32560 mean?

ABB 32560 (“Axis computer firmware re-flash started”): Axis computer firmware re-flash started — ABB robot hardware event on the Axis computer firmware re-flash started (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 32560?

Inspect the Axis computer firmware re-flash started, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés