ABB Error 32562 — Axis computer communication error

What it means · Ce que ça veut dire

Axis computer communication error — ABB robot hardware event on the Axis computer communication error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The system failed to communicate with the axis computer in drive module arg when trying to read firmware information. The system is unable to determine if an upgrade is required of the firmware in the affected drive module. The system goes to system failure state. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Axis computer communication error, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : This may be due to a cable break, bad connector or high levels of interference in the cable between the main computer and the axis computer.
• Make sure the cable between the main computer and the axis computer is not damaged and that both connectors are correctly connected.
• Make sure no extreme levels of electromagnetic interference are emitted close to the robot cabling.

Frequently asked · Questions fréquentes

What does ABB error 32562 mean?

ABB 32562 (“Axis computer communication error”): Axis computer communication error — ABB robot hardware event on the Axis computer communication error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 32562?

Inspect the Axis computer communication error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés