ABB Error 32564 — Axis computer firmware re-flash failed

What it means · Ce que ça veut dire

Axis computer firmware re-flash failed — ABB robot hardware event on the Axis computer firmware re-flash failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

In drive module arg , the upgrade of the firmware in the axis computer arg with hardware identity arg failed. The required upgrade of the axis computer firmware is not performed. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Axis computer firmware re-flash failed, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check other hardware event log messages for detailed explanation of the error condition.
• Retry again by restarting the controller using the main power switch.

Frequently asked · Questions fréquentes

What does ABB error 32564 mean?

ABB 32564 (“Axis computer firmware re-flash failed”): Axis computer firmware re-flash failed — ABB robot hardware event on the Axis computer firmware re-flash failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 32564?

Inspect the Axis computer firmware re-flash failed, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés