LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

ABB Error 33107 — Rectifier / DC-link fault

Error

ABB 33107 (“Rectifier / DC-link fault”): The physical type of the connected rectifier does not match the software configuration. Likely part: Redresseur / DC-Link (rectifier / DC-link).

Updated 2026-10-22 · LogrobotLM reference

What it means

The physical type of the connected rectifier does not match the software configuration.

What to check

  • Modify the system configuration or install the compliant axis rectifier type.
  • Note: Will become the wrong rectifier type code error (39408) on IRC5.

Part to check / replace

ABB 33107 points to the hardware below — start here before ordering.

Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.

Related codes

31108Serial link RS232 fault31114CPU main fault31115Link console fault

Same hardware involved

34268Redresseur / DC-Link

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →