ABB Error 34261 — Rectifier startup error

What it means · Ce que ça veut dire

Rectifier startup error — ABB robot hardware event on the Rectifier startup error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

In drive module arg , the inrush control relay in the rectifier unit at drive unit position arg indicates an error. No operation will be possible until the fault is corrected. The system goes to Motors Off state. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Rectifier startup error, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : This may be caused by a faulty rectifier inrush control relay.
• Restart the controller and try again.
• If the problem remains then replace the unit.

Frequently asked · Questions fréquentes

What does ABB error 34261 mean?

ABB 34261 (“Rectifier startup error”): Rectifier startup error — ABB robot hardware event on the Rectifier startup error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 34261?

Inspect the Rectifier startup error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés