LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

ABB Error 36604Power supplys internes fault

Error / Erreur

🇫🇷 Alimentations internes

ENTRAÎNEMENT : REDRESSEUR, DC-LINK, BLEEDER, ENERGY BANK (34xxx, 36xxx, 386xx S4C+)

ABB 36604 (“Power supplys internes fault”): Power supplys internes fault — ABB robot hardware event on the power supplys internes (Omnicore). Likely part: Alimentations internes (power supplys internes).

Updated 2026-08-29 · LogrobotLM reference

What it means · Ce que ça veut dire

Power supplys internes fault — ABB robot hardware event on the power supplys internes (Omnicore). Seen across controller generations. Severity: Critical. Field diagnosis below (French); your robot's own manual remains authoritative.

Les rails d'alimentation électrique internes n'ont pas réussi à démarrer correctement à l'allumage.

What to check · Que vérifier

  • Inspect the power supplys internes, its wiring and connections first.
  • Match this code against your robot's event-log timeline before swapping parts.
  • Follow the French field checks below — they are the tested sequence for this fault.
  • Vérifier le module proxy d'échange de puissance et redémarrer la baie.
  • Remplacer la carte logique.
  • À savoir : Défaut de carte de distribution d'énergie logique d'armoire.

Part to check / replace · Pièce à contrôler / remplacer

ABB 36604 points to the hardware below — start here before ordering. · 36604 met en cause l'organe ci-dessous : commencez par là.

Tap a part for every code that points to it — and verify the exact variant for your controller before ordering. · Touchez une pièce pour tous les codes qui la citent ; vérifiez la variante exacte avant commande.

Frequently asked · Questions fréquentes

What does ABB error 36604 mean?
ABB 36604 (“Power supplys internes fault”): Power supplys internes fault — ABB robot hardware event on the power supplys internes (Omnicore). Seen across controller generations. Severity: Critical. Field diagnosis below (French); your robot's own manual remains authoritative.
How do you troubleshoot ABB error 36604?
Inspect the power supplys internes, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.
Which part is involved in ABB 36604?
36604 points to Alimentations internes (power supplys internes). Confirm the real cause against the robot backup before replacing a part.

Related codes / Codes liés

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →