ABB Error 37083 — Purge sensor has detected pressure failure

What it means · Ce que ça veut dire

Purge sensor has detected pressure failure — ABB robot hardware event on the Purge sensor has detected pressure failure (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Purge fault reported from manipulator interface board (MIB) arg. The purging system has detected pressure not OK from sensors. Motors and paint equipments are turned off, run chain is open and SMU possibly disconnected. (Depending on signal timing.) Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Purge sensor has detected pressure failure, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check air supply.
• Check that air outlet is not blocked.
• Check purge sensors and cabling for purge sensors.
• 4.5 3 xxxx

Frequently asked · Questions fréquentes

What does ABB error 37083 mean?

ABB 37083 (“Purge sensor has detected pressure failure”): Purge sensor has detected pressure failure — ABB robot hardware event on the Purge sensor has detected pressure failure (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains…

How do you troubleshoot ABB error 37083?

Inspect the Purge sensor has detected pressure failure, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés