ABB Error 37087 — Purge sensor arg watchdog pulse has stopped.

What it means · Ce que ça veut dire

Purge sensor arg watchdog pulse has stopped. — ABB robot hardware event on the Purge sensor arg watchdog pulse has stopped. (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Pulses are missing from manipulator interface board (MIB) for the PPSB sensor. Power and communication to the manipulator and equipment located in "Ex p" encapsulated area has been disconnected. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Purge sensor arg watchdog pulse has stopped., its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check HMI and system status.
• Check LED status on MIB.
• Check purge sensors and cabling for purge sensors.

Frequently asked · Questions fréquentes

What does ABB error 37087 mean?

ABB 37087 (“Purge sensor arg watchdog pulse has stopped.”): Purge sensor arg watchdog pulse has stopped. — ABB robot hardware event on the Purge sensor arg watchdog pulse has stopped. (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains…

How do you troubleshoot ABB error 37087?

Inspect the Purge sensor arg watchdog pulse has stopped., its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés