ABB Error 37099 — Temp. too high, sensor arg

What it means · Ce que ça veut dire

Temp. too high, sensor arg — ABB robot hardware event on the Temp. too high, sensor arg (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

System overheat detected on manipulator control board (MCB) arg. Sensors supervised on motors, Serial measurement unit (SMU) or process equipment. Run chain has been opened. Sensors 1-8: Robot motors 1-8. Sensor 9: SMU. Sensors 10-14: Process 1-5. Please refer to current robot configuration for more details. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Temp. too high, sensor arg, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Wait until the overheated motor or equipment has cooled down.

Frequently asked · Questions fréquentes

What does ABB error 37099 mean?

ABB 37099 (“Temp. too high, sensor arg”): Temp. too high, sensor arg — ABB robot hardware event on the Temp. too high, sensor arg (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 37099?

Inspect the Temp. too high, sensor arg, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés